ENGLISH
Normal phenomenon on ‘Diamondtron U3-CRT’ monitors
Misalignment of Aperture Grille
Due to the nature of the Diamondtron U3-CRT, in rare cases, a misalignment of the aperture grille
may happen by the shock or vibration caused during transportation. If a black vertical line appears
on the screen, apply a light shock to the side of the monitor with your hand. If the problem persists,
follow the procedure below.
Display a full white picture and inspect the problem area.
Display a high-white picture that covers the problem area to shoot a strong electron beam.
Leave it for a while, until the problem disappears.
Damper Wires
The two faint horizontal lines that may be visible on the screen are actually the shadows of steel
wires called
Damper Wires. All Diamondtron U3-CRT based monitors have these wires for structural
reasons.
A
B
Problem
Check
No sound.
o
The Audio Cable is properly connected.
o
The audio output level of the audio equipment is within the specification of
the monitor.
F
o
The audio equipment (computer etc.) is ON.
o
If the headphone is connected, disconnect it.
o
The Volume is turned up.
The sound is too
loud or too quiet.
G
o
The audio output level of the audio equipment is within the specification of
the monitor.
A strange noise is
heard.
H
o
The Audio Cable is properly connected.
17 TROUBLE SHOOTING
