ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
[Cable Wiring]
A
Collect cables at the back of the stand.
B
Place the cover by inserting the tabs into guide
holes and then sliding the cover downward.
COMPUTER SETTING
n
Signal Timing
When you connect the monitor to the computer for the first time, set the signal timing of the
computer to VGA before connection. Change to the desired signal timings listed on page 24 in
COMPLIANT TIMING, after you confirm that the picture appears normally at VGA.
n
Windows 95/98/2000/Me/XP Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP by connecting the monitor to DDC2B compliant computer with the
Signal Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com (U.S.A.)
http://www.iiyama.co.uk (U.K.)
NOTE
n
For additional information on how to download the driver for your monitor, please
access one of the internet sites noted above.
n
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.
