WIRELESS NETWORKING
DMS3-CTC-25-115 v1.0
27
3
3.5 Using the guest access point
Introduction
Your TG-1 Gateway allows you to enable a second access point. This is a dedicated guest access point.
Users that are connected to the guest access point can use the TG-1 Gateway’s Internet connection but
they can not access your home network or shared content.
Enabling the guest access point
Proceed as follows:
1
Browse to the
For more information, see
“4.1 Access from your local network” on page 29
2
Click
Wireless
. The
Wireless
page appears.
3
On the left menu, select the
second
access point. By default it will have a “-Guest” suffix.
4
Under
Access Point
, switch
Enabled
to
.
5
Click
Save
.
6
The guest access point is now up and running. You can now connect to this access point with the
wireless settings that are listed under access point.
Assigning WPS function to the guest access point
Proceed as follows:
1
Browse to the
For more information, see
“4.1 Access from your local network” on page 29
2
Click
Wireless
. The
Wireless
page appears.
3
On the left menu, select the
first
access point.
4
Under
Access Point
, switch
WPS
to
and click
Save
.
5
The
Wireless
page closes. Click
Wireless
again. The
Wireless
page reappears.
6
On the left menu, select the
second
access point.
7
Under
Access Point
, switch
WPS
to
and click
Save
.
8
The
WPS
function is now assigned to the guest access point. If you now connect a device using WPS,
the device will be connected to the guest access point.
By default, WPS is assigned to the main access point. If you want to assign it to the guest access
point
