11
Guidance display function [Procedure display]
This function displays and guides the
remedy procedures for malfunctions or
error messages that may occur during use.
If an error message appears, the screen will switch to the one showing the procedures to be taken
depending on the displayed details.
(Some guidance displays do not require switching to the procedure display.)
Follow the instructions on the screen to remedy the error.
<Example 1> When “Negative pressure detected” is displayed
As a remedy, perform a clogging check (refer to page 16 ).
<Example 2> When “Sensor error” is displayed
Press
(procedure display). The remedy procedure will display.
When
(QR display) is pressed again, the screen returns to the Error Message screen.
Press
to cancel the display.
Hold
down for
1 second
or longer
Erasing the measurement history
The latest measurement value records can be deleted one item at
a time.
Use this when a measurement value has been accidentally saved.
Hold down
for 1 seconds or longer on the HISTORY Screen.
“Erase Complete” displays for approx. one second, and then contents of the data saved
last are erased from the internal memory.
The display returns to the HISTORY screen.
“Erase complete” displays
Returns to HISTORY screen
To erase the entire history, refer to the section “Erasing the entire history” (page 19 ).
Procedure
display
As a remedy, perform a clogging check (refer to
page 16 ) or span calibration (refer to page 6 ).
Summary of Contents for PACK MASTER RO-105S
Page 37: ...31 MEMO ...
Page 38: ...32 MEMO ...
