28
SDMX PS/2 Mini Extender Range
Local Console Commands
After pressing the initial ‘hot’ key sequence on the Local keyboard, you can
issue a number of commands by pressing additional keys. These commands
allow you to control a Private mode session on the Local console, reset the
keyboard and mouse or restore the Local Unit’s factory default settings.
Command Key
Sequence
Toggle Local Unit Private Mode
<Scroll Lock>
SDMX/D2, SDMX/DA2 only
Use this command to begin or end a Private Mode session at the Local console (see
page 21).
Toggle Remote Video Blanking State
<Left Control> + <Scroll Lock>
SDMX/D2, SDMX/DA2 only
Use this command to determine whether the Remote console monitor will be blanked
(default setting) or enabled during a Private mode session at the Local console (see
page 21).
Reset Local Keyboard and Mouse
<F1>
Resets the Local console’s keyboard and mouse. You may need to do this if you have
hot-plugged a keyboard or mouse and it has not initialized correctly.
Mouse Recovery
<F3>
Use this command if you experience erratic movement of the mouse pointer or you
have lost mouse movement after hot plugging the Local unit into the CPU. In the
case of erratic mouse movement, you may need to enter the command a number of
times to re-synchronize the mouse signal. Alternatively, stop moving the mouse for a
few seconds and the operating system’s mouse drivers may automatically re-
synchronize the signal. If the Local unit has been hot-plugged, this command will
issue a request to the OS to initialize the mouse.
Use this command with care.
Exit Command Mode and Save
<Esc>
Exit Command Mode and save all settings to EEPROM.
Set Local Unit to Default State
<Left Control> + <F9>
Restore Local Unit factory defaults (configuration and DDC).
Summary of Contents for SDMX/S2
Page 2: ......
