Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
Power plug 12V 1A
Power plug
12V 1A
USB to PC
DVI in from PC
DVI to Monitor
USB from Keyboard and mouse
Quick Installation Maxfl ex Single
local / CPU – remote / CON
1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit.
Connect keyboard and mouse to the CON / Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a network cable.
4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in).
5. Almost done! Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the
microphone
6. Using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video
sharing the network has to support IGMP snooping.
HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years)
Network cable CAT5e/6/7/ up to 150m/492ft (redundant)
D
VI out
to Monitor
Network cable CAT5e6/7/ up to 150m/492ft - main link
Audio from PC
Audio to PC
Audio to speaker
Audio from microphone
RS232 plug
RS232 plug
Power plug 12V 1A
(redundant)
Power plug
12V 1A (redundant)
Delivery Content
Delivery Content
LOCAL/CPU Unit
LOCAL/CPU Unit
1 x MA local (CPU)
1 x MA local (CPU)
1 x wall power supplyl 12V 1A (INT or EU-plug)
1 x wall power supplyl 12V 1A (INT or EU-plug)
1 x DVI - DVI cable 1,8m/5.9ft
1 x DVI - DVI cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
1 x USB cable 1,8m/5.9ft
4 x rubber feet
4 x rubber feet
REMOTE/CON Unit
REMOTE/CON Unit
1 x MA remote (CON)
1 x MA remote (CON)
1 x wall power supplyl 12V 1A (INT orEU-plug)
1 x wall power supplyl 12V 1A (INT orEU-plug)
4 x rubber feet
4 x rubber feet
Open OSD menu
Open OSD menu
The OSD main menu is opened with the standard shortcut: 5 x
The OSD main menu is opened with the standard shortcut: 5 x
ALT Gr
ALT Gr
(Attention: the fi rst 20 seconds 5 x Scroll always works, in case
(Attention: the fi rst 20 seconds 5 x Scroll always works, in case
the shortcut was forgotten.)
the shortcut was forgotten.)
Switching list
Switching list
: CTRL+ALT+PRINT
: CTRL+ALT+PRINT
Changing the shortcuts
Changing the shortcuts
in the OSD menu
in the OSD menu
Go to the Remote Settings and then navigate to Keyboard Short-
Go to the Remote Settings and then navigate to Keyboard Short-
cut.
cut.
