background image

 

Regulatory and Standards Compliance 

2011-02-23 

41

 

10 

Regulatory and Standards Compliance 

Pos: 60 /806-IHSE/Zertifikate/ATB_Europäische Konformitätserklärung @ 5\mod_1278579640901_6.doc @ 42686 @ 2 

 

10.1  CE Declaration Of Conformity 

The products listed below in the form as delivered comply with the 
provisions of the following European Directives: 

2004/108/EG 

Council Directive on the approximation of the laws of 

 

the Member States relating to electromagnetic 

 compatibility 

 

 

CE Marking 2009   

Product list: 

K473-SSH, K473-DSH, K473-SST, K473-DST 

  

The products comply with the following harmonized standards for 
Information Technology Equipment: 

 

EN 55022:2006 + A1:2007 (Class A) 

 

EN 55024:1998 + A1:2001 + A2:2003 

 

This declaration certifies the conformity to the specified directives but 
contains no assurance of properties. The safety instructions and 
installation guidelines noted in this manual shall be considered in detail. 
Compliance with the specifications for cable lengths and types is 
mandatory. 

Manufacturer: 

IHSE GmbH 
Maybachstrasse 11  
88094 Oberteuringen 
Deutschland 

Oberteuringen, 26 January 2010 

The Management 

 

 

Use in a Domestic Environment 

This is a Class A product. In a domestic environment, this product may 
cause radio interference in which case the user may be required to take 
adequate measures. 

 

Pos: 61 /806-IHSE/Zertifikate/ATB_North American Regulatory Compliance_NUR in EN @ 5\mod_1280395355750_6.doc @ 43979 @ 2 

 

Summary of Contents for K473-DSH














































Reviews: