Draco vario
DisplayPort
1.2
Description
21
4.3.3 Connection Compatibility
Extender modules are available in the following connection versions. The type of connection of the
extenders can be recognized by the article number:
•
Connection via Cat X cable ("C")
•
Connection (1.25 Gbit/s = "1G") via single-mode fiber cable ("S")
•
High speed connection (3.125 Gbit/s = 3G) via single-mode fiber cable ("X")
Fiber devices can be used with Multi-mode and Single-mode cables (see chapter 12.2.2, page 111).
Point-to-point Connection between Extender Modules
Cat X 1G
Fiber 1G
Fiber 3G
Cat X 1G
Compatible
Not compatible
Not compatible
Fiber 1G
Not compatible
Compatible
Not compatible
Fiber 3G
Not compatible
Not compatible
Compatible
Connection of Extender Modules via Matrix or Cross-Repeater 485-BX/485-BXX
Cat X 1G
Fiber 1G
Fiber 3G
Cat X 1G
Compatible
Compatible
Not compatible
Fiber 1G
Compatible
Compatible
Not compatible
Fiber 3G
Not compatible
Not compatible
Compatible
Connection of Extender Modules via Matrix Draco tera enterprise with Bridge Card
Cat X 1G CON Unit
Fiber 1G CON Unit
Fiber 3G CON Unit
Cat X 1G CPU Unit
Compatible
Compatible
Compatible
Fiber 1G CPU Unit
Compatible
Compatible
Compatible
Fiber 3G CPU Unit
Not compatible
Not compatible
Compatible
A special card (bridge card) is available to be used with the matrix Draco tera enterprise to connect up to
8 CPU Units with 1G transmission speed (Cat X or fiber version). The transmission speed will be increased
within the bridge card from 1G to 3G. The signals are transmitted to the backplane of the matrix and can be
output to up to 8 CON Units, connected to the matrix.
This function is only available in one direction.
1G CPU Unit - Draco tera enterprise with bridge card - 3G CON Unit
