Configuration
2021-07-06
33
5
Configuration
Pos: 37 /806-IHSE/Konfiguration/Übertragungsparameter/Übertragungsparameter_486 @ 18\mod_1507290188129_6.doc @ 190906 @ 2 @ 4
5.1 Transmission Parameters
The device operates with a proprietary video coding method.
In default configuration, the device adapts dynamically to monitor
resolution and image content. This configuration is suitable for almost all
conditions and should only be modified if image quality is not fully
satisfactory.
In exceptional cases the displayed video image may exhibit "frame
dropping" (loss of single frames) or color effects.
Pos: 38 /806-IHSE/Konfiguration/Kommando-Modus/474-xx @ 6\mod_1304585026863_6.doc @ 51291 @ 2 @ 1
5.2 Command Mode
During normal use, the console keyboard functions in the usual manner.
However, for all KVM Extenders with USB-HID support, you can set the
keyboard into a Command Mode by using a specific 'Hot Key' sequence.
While in Command Mode, several functions are performed via keyboard
commands. To exit Command Mode, press <Esc>.
While in Command Mode, the
Shift
and
Scroll
LEDs on the console
keyboard will flash.
In Command Mode normal keyboard and mouse operation will cease.
Only selected keyboard commands are available.
If no keyboard command is executed within 10 s after activating
Command Mode, it will be automatically deactivated.
The following table lists the keyboard commands to enter and to exit
Command Mode and to change the 'Hot Key' sequence:
Function
Keyboard Command
Enter Command Mode (default)
2x <Left Shift> / ('Hot Key')
Exit Command Mode
<Esc>
Change 'Hot Key' sequence
<current 'Hot Key'>, <c>,
<new 'Hot Key' code>, <Enter>
Until 2011-30-09:
<Left Ctrl> + <Left Shift> + <c>,
<'Hot Key' Code>, <Enter>