NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
4
INNOVATIVE HEARTH PRODUCTS
•
LINEAR ELECTRIC FIREPLACE
•
INSTALLATION INSTRUCTIONS
RECESSED FRAMING OPTION
Framing Dimensions for Recess Installation
A
B
C
Figure 3: Recessed Framing Dimensions
WALL MOUNTED AND RECESSED INSTALLATION
The Electric Fireplaces listed in this manual accept either wall-mounted installation or can be installed as a recessed appliance
for a more finished appearance.
WALL MOUNTING OPTION
Minimum distance from
ceiling 15 3/4” (600mm)
Minimum distance to
walls and floors 7 7/8”
(300mm)
Figure 2
Surface wall mounting can be achieved by securing
the provided brackets to a surface such as a wall in
standard construction after first finding weightbear-
ing studs.
If this option is used, you will be able to enjoy the full
functionality of the fireplace, including light and heat.
NOTE: Minimum distances between walls, floors, and
ceilings must be observed. See
Figure 2.
Failure to do
so may result in damage to finishing materials on the
wall including but not limited to paint and wallpaper.
These Electric Fireplaces offer a recessed instala-
tion (see
Figure 3
) that gives the fireplace a more
distinguished appearance.
Recessed framing places the front glass on the unit
nearly flush with the wall. With this option, the fire-
place will be more permanently affixed in its desired
position in the home for a more dramatic presentation.
With recessed installation, the heater in the unit
must be disabled by removing the access panel
and pulling apart a pair of wires to the blower
(see
Figure 6
).
In addition, the power switch must
be enabled and power will be controlled with the
provided remote.
Recessed Framing Dimensions
MODEL
A - Height
B - Width
C - Depth
54"
18 5/8" (473mm)
52" (1321mm)
4 1/8" (105mm)
60"
18 5/8" (473mm)
52" (1321mm)
4 1/8" (105mm)
Possible locations for
Electrical Receptacle/Outlet
Blower Heat
Discharge
Outlet
900264-00 Rev. NC 06/14
