IHP MPI27 Installation Instructions Download Page 4

4

Printed in U.S.A. © 2015 Innovative Hearth Products

P/N  900419-00 Rev. NC  02/2015

IHP reserves the right to make changes at any time, without notice, in design, materials, 

specifications, prices and also to discontinue colors, styles and products. Consult your local 

distributor for fireplace code information.

1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

Summary of Contents for MPI27

Page 1: ... 27 Replacement NG Burner Orifice Kit Cat No Description H9158 MPI27 and MPI27CD Replacement NG Burner Orifice Kit Installation Instructions Step 1 TURN OFF THE GAS SUPPLY TO THE APPLIANCE UNPLUG THE POWER CORD Step 2 Remove the facade by lifting it up and away from the unit to unseat the facade hooks from the mounting slots on the unit Place the facade face down on a soft non abrasive surface to ...

Page 2: ... holding burner assembly to the fire box bottom While lifting up on right side shift burner assembly to the right until it releases from the air shutter c Remove shutter tube by lifting off of adjustment arm stud Step 5 MPI27CD Burner Removal see Figure 4 a Remove accent glass from front of log support if already installed b Remove one phillips screw and washer near the front right side of burner ...

Page 3: ...ips of the flames sooty or create sooting on the viewing glass logs or heat exchanger If soot begins to form after burning the air shutter should be opened gradually until the sooting condition stops Gas quality and gas pressure may vary which can affect the burning characteristics of the insert URNER Figure 7 Burner Flame Appearance No Blue Flame Center Soot at Flame Tip Dark Orange Flame IMPROPE...

Page 4: ...2 2015 IHP reserves the right to make changes at any time without notice in design materials specifications prices and also to discontinue colors styles and products Consult your local distributor for fireplace code information 1508 Elm Hill Pike Suite 108 Nashville TN 37210 ...

Reviews: