FM100 FLOOR MEDIA KIT
[FOR USE WITH APPLIANCE MODELS BLAZE&GLOW18/24, MAGNIFLAME24/30, MULTISIDED27, DUAL-FLAME EOS18, MONTEBELLO18/24, SHERIDAN18/24, MNF24/30/36
LMF24/30/36, GLOWRAMP LBG18/24/30/36, MULTI-SIDED FVFM27, VF18/24, DUAL-BURNER VD1824, SINGLE-BURNER VS1824, SOMERSET27 FVFM27]
FM100 FLOOR MEDIA KIT
P/N 115579-01
Rev. B, 04/2017
HEARTH PRODUCTS
KITS AND ACCESSORIES
Cat. No.
Model
Description
F1762
FM100
Floor Media Kit
REQUIRED TOOLS AND SUPPLIES
None
GENERAL INFORMATION
The fl oor media kit is used to give a more natural appearance to the
fi replace fl oor where the gas log set is installed.
READ ALL THE STEPS BEFORE STARTING THE INSTALLATION
THE APPLIANCE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE
INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarifi cation of these instructions
or are not qualifi ed to properly install this kit, contact you local
distributor or dealer.
If any of these parts are missing or damaged, contact your dealer or
IHP.us.com for referral information.
KIT CONTENTS
9 ea. Fiber Log Pieces
1 ea. Volcanic Stone
1 ea. Ember Material
1 ea. Instruction Sheet
WARNING
•
Make sure the unit is turned off and cool before
adding fl oor media material to fi replace fl oor.
•
Do not add extra logs or ornaments such as pine
cones, vermiculite or glowing embers (rockwool).
Using these added items can cause sooting. Use
only the material included in this kit.
•
Do not place volcanic stone, embers or fi ber log
pieces on logs or burners. This may cause sooting.
Place fl oor media material only on the fi replace fl oor.
Figure 1 - FM100 Floor Media Kit
Figure 2 - Placing Volcanic Stone
IHP.us.com
1
INSTALLING FLOOR MEDIA KIT
1.
Place decorative log pieces randomly as desired on fi replace hearth.
Place volcanic stone around base of unit making sure the burner
ports and valve access are not blocked
(see
Figure 2
).
Retain a
small amount of volcanic stone to be used in step 4.
f i r e - p a r t s . c o m
