2
Figure 3
Figure 4
Figure 2
Seal with Hi-Temp Duct Tape
Air Inlet Tube
Air Vent
Flex Duct
Flex duct extends
up to 3 feet
Air vent location must allow for bushes, snow,
and other possible obstructions
4-1/2" x 4-1/2"
Framed opening
Outside air vent
termination
Secure and seal duct to col-
lars with hi-temp duct tape
(both ends) remove oil at
ends of duct to ensure proper
adhesion of duct tape to be
applied
Seal gaps with non-
combustible hi-temp
sealant or duct tape
Secure and seal duct to collars
with hi-temp duct tape (both
ends). Remove oil at ends of
duct to ensure proper adhe-
sion of duct tape to be applied
Flex duct extends up
to 3 feet
Air vent location must allow for
bushes snow and other possible
obstructions
Remove Air inlet
cover (2 screws)
Cut and remove any
blocking insulation
Bend tabs out
before installing
Outside air vent termination
Tabs
Printed in U.S.A. © 2014 Innovative Hearth Products
P/N 127169-01 Rev. B 02/2017
IHP reserves the right to make changes at any time, without notice, in design, materials, specifi cations, prices and also to discontinue colors, styles and products. Consult your local distributor for
fi replace code information.
IHP
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
f i r e - p a r t s . c o m
