iH26 IB 72809.fh10 7/28/09 2:16 PM Page 5
3
Using the iH26
Connect iH26 to Power Source
a) Plug the AC adaptor cable into the
AC Adaptor Jack and the other end into a standard 120v wall socket. Adaptor must be
plugged in to charge iPod or shuffle. For portable operation, install 4 “AA” batteries in the compartment on the bottom of the unit.
Setting the Clock
a) Press and hold the
Time Set Button until the display flashes.
b) Press the
Hour Set Button to adjust the hour display (a PM indicator appears when time is set to PM; there is no AM indicator)
c) Press the
Minute Set Button to adjust the minute display. When the correct time is displayed, press the
Time Set button
again. Two beeps will indicate clock setting is complete.
d) To adjust the clock display between 12 and 24 hour settings, slide the
12/24 Hour Switch on the back of the unit to 12 hour
for standard 12 hour AM/PM display or to 24 hour for 24 hour “military” display.
Using the Alarm
Setting the Alarm
a) Press and hold the
Alarm Set Button until the alarm time flashes to wake to iPod (buzzer alarm sounds if no iPod is detected).
You cannot wake to iPod shuffle.
b) Press the
Hour Set Button to set the desired alarm hour (a PM indicator appears when time is set to PM; there is no AM
indicator)
c) Press the
Minute Set Button to set the alarm minute time. When the desired alarm time is displayed, press the
Alarm Set
Button again. Two beeps will indicate alarm setting is complete. Alarm is now armed, indicated by the alarm clock icon.
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)
a) Press the
Alarm On/Off Button to arm or disarm alarm functions. When armed, the related alarm icon appears in display.
Resetting the Alarm to Come on the Next Day
a) When the alarm is sounding, press the
Alarm Reset/Power Off Button to stop alarm and reset it to come on the following day.
Snooze
a) Press the
Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again 9 minutes later. Snooze
can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The iH26 has a sure alarm feature so the buzzer alarm will still sound in the event of power failure, if backup battery is installed.
iPod and shuffle
Playing and charging your iPod or shuffle
a) Gently dock iPod in
Dock, then turn Dock Adjust Dial until iPod is held firmly in place in dock. To use your shuffle, gently
dock it in the Shuffle Dock. When docked, iPod and shuffle will charge until fully charged when the iH26 is connected to an outlet
with AC adaptor.
Unit will not overcharge iPod or shuffle
.
b) Press the
iPod Button to play iPod, and again to pause. For shuffle play, press iPod button and use controls on your shuffle.
Do not play iPod and shuffle at the same time.
c) Press
Volume UP or DOWN buttons to adjust iH26 volume up or down.
e) Press
Alarm Reset/Power Off Button to turn iH26 and iPod off. To turn shuffle off, use shuffle controls.
8
Troubleshooting
Symptom Possible Problem Solution
iPod didn’t charge up
iPod is not installed properly
Remove your iPod from the dock and check for obstruction
on the connectors in the dock and on your iPod. Then reseat
it in the dock.
iPod is locked up/ frozen
iPod battery has problem
Please make sure your iPod is working properly before
docking into the unit. Please refer to your iPod manual for
details.
Sound is distorted
Volume level is set too high
Decrease the volume
Sound source is distorted
If the iPod original sound source (MP3) is of poor quality,
distortion and noise are easily noticed with high-power
speakers. Try a different audio source such as a music CD.
If you are using an external sound source like older generation
of iPod or iPod Shuffle, try reducing the output volume on
the device itself.
Remote Control didn’t
work
Batteries are weak
Replace current batteries with new ones
Remote Control is not pointed toward the
iH26 remote sensor or sensor is blocked
Point the Remote Control toward the iH26, move within 10
feet of the unit, make sure sensor is unobstructed
Battery weak
Replace current battery with new battery
Travel Lock is in Lock or Off position
Move Travel Lock switch to Remote position
Try turning bass boost OFF on your iPod/sound source.
