- Press the
Power Button
to turn the unit ON.
- Press and hold the
Bluetooth Pairing Button
until the blue LED
flashes to enter pairing mode.
- Select ‘iHome iZBT110’ on your device’s Bluetooth menu to connect.
USING LIGHT THERAPY
Color light therapy can enhance the home through ambient or night-time lighting to help
improve mood, energy and sleep.
1. Press the
Light Therapy Button
to access Light Therapy mode.
Continue to press as needed to cycle to each mode, including OFF:
Candle
:
Provides the ambiance of a calming candle flicker without the safety risks
posed by a real flame
Nightlight
:
Deal for illuminating a small space
Glow
:
A gentle fading spectrum of solid colors creates a beautiful atmosphere for
day or night mood lighting
One Color
:
Select the current color
Pulse
:
Light pulses to Bluetooth audio
ADJUSTING THE BRIGHTNESS
When you turn on Light Therapy or change a light mode, press the
-
or
+ Buttons
within 5
seconds to adjust the brightness level.
Press and hold the
Light Therapy Button
for 2 seconds to exit light therapy mode. Press
the
Light Therapy Button
again to resume mode at the last light pattern used.
USING SOUND THERAPY
Sound Therapy uses specially recorded and engineered sounds to cancel out distractions
and allow your mind to calm.
1. Press the
Sound Therapy Button
to access Sound Therapy
mode. Continue to press to cycle to each mode:
Sound Therapy Modes:
4-7-8 Breathing Coach
Zen
Dream Peace
Meditation Trance Ocean
Storm
Nature River
Wind Chimes
Air
Focus
Quiet
Drive Off
USING THE SLEEP TIMER
The programmable timer mode lets you set any combination of light and sound therapy
for a set duration. The light and sound levels will gradually decrease over the last 15
minutes (fade begins right away if timer is set to 10 minutes or less) until the unit shuts
off.
Press the
Sleep
Timer Button
as needed to cycle to the desired timer duration: 10
minutes, 30 minutes, 1 hour, 2 hours, 4 hours, 6 hours, 8 hours, or OFF.
Timer mode is first indicated by a voice guide and the
Timer LED
next to the Timer
button. Green indicates more than 60 minutes remaining, yellow indicates 30 minutes or
less remaining and red indicates 10 minutes or less remaining.
Press and hold the Timer Button for 2 seconds to cancel timer mode. Timer mode is
inactive when no timer indicator is lit.
CONN PLAYING BLUETOOTH AUDIO
Stream Bluetooth audio through the speaker in the unit:
1. Press and hold the
Bluetooth Pairing Button
to enter pairing mode. The Bluetooth
LED will flash.
2. Select ‘iHome iZBT110’ on your Bluetooth device to connect.
3. The
Bluetooth LED
will glow solid to confirm a device is connected.
4. Use the controls on your device to Play, Pause, and navigate tracks.
5. Use the
+
and
- Buttons
on the unit to control volume.
RESETTING THE UNIT
In the event of interrupted operation, use the extended tip of a paper clip or other thin
tool to press in the Reset Button pinhole located on the back of the unit.
MAINTENANCE
• Place the unit on a level surface away from sources of direct sunlight or excessive
heat.
• Protect your furniture when placing your unit on a natural wood and lacquered
finish. A cloth or other protective material should be placed between it and the
furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents such as thinner or similar materials can damage the surface of the
unit.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause
injury and damage to your device. To dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid
wastes, since they
contain toxic substances.
•
Always dispose of used batteries/electronics in accordance with the prevailing
community regulations.
• Many electronics retailers now recycle batteries and other electronic components at
no charge
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies
with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
•
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
•
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device
contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
The device has been evaluated to meet general RF exposure requirement and compliance with RSS-102
RF exposure, users can obtain Canadian information on RF exposure and compliance.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
Cet équipement est conforme aux limites d'exposition de rayonnement d'IC RSS-102 déterminées pour un
environnement non contrôé
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité
de l'utilisateur à utiliser l'équipement.
CAN ICES-3 (B) / NMB-3(B)
ONE YEAR LIMITED WARRANTY
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be
free from defects in workmanship and materials, under normal use and conditions, for a period of one (1)
year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best
to first return it to the store where it was originally purchased. Should this fail to resolve the matter and
service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or,
at its discretion, replace this product without charge. This decision is subject to verification of the defect or
malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.
If service is required, please contact Customer Service at ihomeaudio.com/support/contact to obtain a
Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate
in-warranty coverage. If proof of purchase cannot be produced, the product will be deemed out-of-warranty.
The date of purchase, vendor, product model number, and purchase price must be legible and verifiable.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not
cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which
have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged
by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of
shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in
the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors,
shareholders, members or agents be liable to you or any third party for any consequential or incidental
damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on
implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of
warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or
credit card) for purchase of your SDI product.
© 2020 SDI Technologies, Inc. All rights reserved
Questions? Visit www.ihome.com
Model: iZBT110 QSG
Instruction manual - US English
Size: 350mm(W) x 120mm(H)
Folded Size: 102 x 120 mm
157g Art paper / 1C + 1C / Straight corners
June 18, 2020-v9
iZBT110-061820-A(EN)
Printed in China
2. Connecting to Bluetooth
WHAT’S IN THE BOX
CANDLE
USB Charging Cable
iZBT110 Zenergy Candle
Instructions
iHome
iZBT110
GETTING STARTED
1. Charging the Unit
CHARGE BEFORE USE
Connect one end of the included USB charging cable to the
USB Charging Port
on the
back of the unit. Connect the other end to a USB AC adapter (not included) or the USB
charging port on your computer/laptop.
USB AC
adaptor
(not included)
USB charging
cable (included)
Charging LED Status:
Flashing Red LED:
Unit is charging.
Slow Blinking Red LED:
Battery low. Charge unit.
LED OFF:
Unit is fully charged.
FRONT PANEL
Light Therapy Modes
Sound Therapy Modes
Power ON/OFF
Model: iZBT110
Portable Bluetooth Sound Soother
QUESTIONS? visit www.ihome.com
BACK PANEL
Minus
Button
Sleep Timer Button
Plus Button
Bluetooth Pairing Button
Timer LED
Bluetooth Pairing LED
Micro USB Charging Port
Reset Button
Charging LED
2. Press and release the
–
or
+
Buttons
to
adjust speaker volume.
3. Press and hold the
Sound Therapy Button
for
2 seconds to exit sound therapy mode.
Note: After 60 minutes of no sound or light
activity, unit will automatically power OFF. To
resume operation, press the Power Button.
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution
or other electrolytic substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95°
Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire.
• Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be
encountered.
• Always keep batteries out of the reach of infants and small children,
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future
reference.
1 Do not use this product near water, and clean only with dry cloth.
2 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or
other appliances (including amplifiers) that produce heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug this product during lightning storms or when unused for long periods of time.
6 Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7 No naked flame sources, such as lighted candles, should be placed on this product.
8 Attention should be drawn to the environmental aspects of battery disposal.
9 This product is suitable for use in tropical and/or moderate climates.
10 WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
11 Do not dispose of batteries in the household trash or fire.
12 CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
13 If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully
before storage.
14 Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.
