background image

15

FCC Information

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an 

uncontrolled environment. 

This device complies with Part 15 of the FCC Rules, operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including interfer-

ence that may cause undesired operation.

•  Warning: Changes or modifications to this unit not expressly approved by the 

party responsible for compliance could void the user’s authority to operate the 
equipment.

•  NOTE: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following 
measures:
•  Reorient or relocate the receiving antenna.
•   Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with 
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). 
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause 
undesired operation of the device.

Lémetteur/récepteur exempt de licence contenu dans le présent appareil est 
conforme aux CNR
d'Innovation, Sciences et Développement économique Canada applicables aux 
appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) L'appareil ne doit pas produire de brouillage;
(2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le 
brouillage est susceptible d'en compromettre le fonctionnement.

Model: iWBT5

FCC ID: EMOIWBT5

IC: 986B-IWBT5

This equipment should be installed and operated with a minumum distance of 

20 cm between the radiator and your body.

This equipment should be installed and operated with a minumum distance of 

20 cm between the radiator and your body.

Cet équipement doit être installé et utilisé à une distance minimale de 

20 cm entre le radiateur et votre corps.

Summary of Contents for iWBT5


















Reviews: