background image

10

CONSUMER SAFETY INFORMATION

When  used  in  the  directed  manner,  this  unit  has  been 
designed and manufactured to ensure your personal safety.  
However,  improper  use  can  result  in  potential  electrical 

shock or fire hazards. Please read all safety and operating 
instructions carefully before installation and use, and keep 

these instructions handy for future reference. Take special 
note of all warnings listed in these instructions and on the unit. 
1.  

Water and Moisture

 –  

• Splash-resistant cover must be properly sealed before 

use near water. 

• Dry unit completely before opening splash resistant cover. 

• Do NOT open cover if wet or in a wet environment.

2. 

Heat

  –  The  unit  should  be  situated  away  from  heat 

sources such as radiators, heat registers, stoves or other 

appliances (including amplifiers) that produce heat.

3. 

Power  Sources

  –  The  unit  should  be  connected  to  a 

power supply only of the type described in the operating 

instructions or as marked on the appliance.

4. 

Power-Cable Protection

 – Power supply cables should 

be routed so that they are not likely to be walked on or 

pinched by items placed upon or against them. 

5. 

Cleaning

 – The unit should be cleaned only using a warm 

damp cloth. Do not use solvents, etc.

6.  

Objects and Liquid Entry

 – Care should be taken so that 

objects do not fall and liquids are not spilled  into any 
openings  or  vents  located  on  the  product.  Keep 
splash-resistant cover free of dirt, sand, or objects that 
could interfere with a proper seal.  

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for iWBT1
















Reviews: