iSF-22 IB_back Printing color: Black
• For questions or comments regarding this or other eKids products, please
call our toll-free number:
1-800-288-2792
.
Also visit our website:
www.ekids.com
If problems persist, please do not attempt to repair unit; see warranty
for factory service.
Use the Mode Selector to set the unit to USB Mode.
• Connect a USB flash drive to the USB port on the front of the
unit. (USB Mode is compatible with .mp3 and .wav files only.)
• Press the Power Button to turn the unit ON.
• When a USB drive is detected, the number of files on the USB
drive will appear on the LCD display.
• Press Play, then press the ”” Button to advance
through the files on the USB drive. If you have a large amount
of files saved, press the “10+” Button to advance through 10
folders at a time.
Repeat Button (Works only in USB Mode):
• Press the Repeat Button to repeat the current track.
• Press again to repeat all tracks within a folder.
• Press a third time to repeat all songs on the flash drive.
• Press a fourth time to turn the Repeat function OFF.
If the unit does not respond:
• Make sure unit is completely charged.
• To re-pair your device, press and hold the Play/Pause/ Bluetooth Pairing
Button.
• In the event of interrupted operation, use the extended tip of a paper clip
or other thin tool to press in the Reset Button on the back of the unit.
There are three ways to listen to music with this unit:
• In USB Mode you can connect a flash drive to the unit and
listen to your stored songs.
• In AUX Mode you can connect any audio device using a 3.5mm
audio cable (not included).
• In Bluetooth Mode you can stream music from your smartphone
or other Bluetooth device.
Note: After 15 minutes of no audio activity, the unit will time out.
Press the Power ON/OFF button to resume audio function.
Charging The Unit
1. Connect the included micro USB cord to the micro USB
charging port on the back of the unit.
2. Connect the standard USB plug end of the cord to a power USB
port on a computer or other USB charging device.
For first time use, charge unit for about 5 hours.
Note: The display will read ‘Lo’ when it is time to charge the unit.
The battery indicator on the back of the unit will glow red
while charging, and will shut off when fully charged.
Getting Started
Recording to the USB Drive
Using AUX Mode
Questions or Comments
Troubleshooting
Record your performance and save it to a USB flash drive! (Note: you can
record in Bluetooth or AUX modes only).
Recording Audio in Bluetooth Mode or AUX Mode:
• To start, use the Mode Selector to set the unit to either Bluetooth Mode
or AUX Mode.
• Plug a USB flash drive into the USB port on the front of the unit.
• Make sure the microphone is connected to the unit and the Microphone
ON/OFF Switch is turned ON.
• Select a song from your audio device, and press Play.
• Press the Record Button. The Recording Indicator will glow to confirm
the unit is recording audio. Sing into the microphone to record your
voice over the music.
• When you finish your performance, press the Record Button again to
stop recording. The audio will be saved to your USB flash drive.
Listening to Recordings:
• Use the Mode Selector to set the unit to USB Mode.
• Use the Forward, Reverse, or 10+ Buttons to navigate through
files on your connected USB flash drive, then press Play to listen!
Sharing Recordings:
• Remove the USB flash drive from the unit and connect to a computer
to share your performances!
Charge via USB AC adaptor, computer USB port, or other powered USB port
Computer connected
to working outlet
Computer USB port
OR
USB Adaptor
(not included)
Using USB Mode
• Use the Mode Selector to set the unit to ‘bt’ Mode.
• Turn on your Bluetooth device and make it “discoverable” by turning
on Bluetooth mode (check in Options or Settings).
• “Karaoke 22” should appear in your device’s Bluetooth menu. If “Not
Connected” or a similar message appears, select “Karaoke 22” to
connect it.
• The Bluetooth indicator will glow solid once connected. Put your
Bluetooth device in play mode to begin streaming music.
• Use the “Forward” “Reverse” and “Play/Pause” buttons on the unit to
navigate tracks.
• Pairing automatically occurs in Bluetooth mode. If no device is
connected within 3 minutes, pairing mode will time out. Press and hold
the Play/Pause/Bluetooth Pairing button to re-pair a device.
Using Bluetooth Mode
Master
Volume
Microphone
Volume
LED
Display
Record
USB Charging Port
BACK OF UNIT
Mic Jack 1
USING THE MICROPHONE
• Connect the microphone
to the Mic Jack on the
back of the unit.
• Slide the Microphone
ON/OFF switch to the ON
position.
• Control mic volume using
the rotary dial on the front
of the unit.
• When not in use, store the
microphone in the clips on
each side of the unit.
Mic Jack 2
Line
Out
Line In
(AUX)
LED Display
Power
ON/OFF
Mode
Selector
Light
Show
Play/Pause/
Bluetooth
Pairing
Echo
Repeat
10+
Reverse
Forward
Stop
USB Port
• Use the Mode Selector to set the unit to AUX Mode.
• Connect one end of a 3.5mm audio cable (not included) to
the Line-In Jack on the back of the unit.
• Connect the other end of the audio cable to the headphone
jack of any audio device.
• Use the controls on your audio device to navigate tracks and
play/pause audio.
Power
Indicator
Pairing
Indicator
Recording
Indicator
Light Modes
Echo Modes
By default, the unit will display a repeating light pattern when
no music is playing. When music plays, the unit will activate
‘beat detection’, and lights will pulse along to music.
• Press the Light Show Button to play repeating Light pattern
• Press again to turns light off
• Press again to return to default setting
• Press and hold to turn the top dome light ON/OFF
Press the Echo Button for cool vocal effects! Press
repeatedly to cycle through 8 different echo modes as
you sing through the microphone.
Device Stand
(For Tablets and Smartphones)
Reset
• It is important to keep the unit as dry and clean as possible. You may
clean the cabinet with a cloth or sponge moistened with mild soap and
water. Do not attempt to use strong cleansers or solvents, as they may
cause damage.
• Battery chargers used with the toy are to be regularly examined for
damage to the cord, plug, enclosure and other parts. In the event of
such damage, do not use until the damage has been repaired.
Maintenance
Battery
Indicator
