background image

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free 
from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original 
purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. 
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty 
period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $20.00 charge for 
handling, packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon 
delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of 
purchase. The fee for service without proof of purchase is $40.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective 
batteries are the most common cause of problems encountered.
If service is still required:
1.  Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2.  Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty 

period.

3.  Enclose a check or money order payable to the order of SDI Technologies, for the sum of $20.00 ($40.00 without proof of 

purchase).

4.  Send the unit prepaid and insured, to the Factory Service Center listed below.

Consumer Repair Department

SDI Technologies Inc.

1330 Goodyear Dr.

El Paso, TX 79936-6420

Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products 
which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by 
unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, 
CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the 
owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original 
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, 
members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, 
exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, 
so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which 
vary from state to state.
Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually 
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies 
product.

Questions? Visit www.ihomeaudio.com 

Toll Free Customer Service: 1-877-446-6301

©SDI Technologies 2011 All rights Reserved.

iA9192-041411-B           

 

 

 

Printed in China

Limited 1 Year Warranty Information

P13

Summary of Contents for IPHONE IA91














Reviews: