Operating the Alarms
At the set time, the alarm will sound for 1 hour.
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the
Button
. The
alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed.
2. Press and release the
Alarm Button
during normal operation (alarm is not sounding) as needed to preview the current alarm
time, arm the alarm (alarm icon is present) or to cancel it (no alarm icon).
3. Press and release the
Snooze Button
while alarm is sounding to temporarily silence the alarm for the set snooze time (default is
9 minutes).
To adjust the snooze time
: press and hold the
Snooze Button
during normal operation (when alarm is not
sounding). The snooze time will flash on the display and 1 beep sounds. Press the
–
or
+ Button
to adjust the snooze time
from 1 - 29 minutes. Press and release the
Snooze Button
again (or no button within 10 seconds). Two beeps will sound to
confirm snooze setting and return unit to normal operation.
Listening to FM Radio
Setting up the Antenna
Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press and release the FM Button to select FM radio mode.
2. When FM mode is selected, press the
–
or
+ Button
to tune the radio to a desired station. The current radio frequency appears
in the lower part of the display. Press and hold the
–
or
+ Button
for a few seconds to scan for the next clear station.
3.
To memorize a station as a preset
:
A. Press the
Presets Button
as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold
the
Presets Button
until the selected preset number begins flashing in the display and 1 beep sounds.
B. Press the
–
or
+ Button
to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the next
clear station.
C. Press the
Presets Button
to confirm the setting, two confirmation beeps will confirm the setting and the preset number you
wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, press the
Presets Button
to choose the desired preset.
5. Press the or
Button
on the unit to adjust the system volume.
4
