manualshive.com logo in svg

iHome IM14, Instruction Manual, Page: 13 / 17

Share
Download
iHome IM14 Instruction Manual Download Page 13

12

Connect a USB cable (not included) to the

 1 Amp USB Charging Port

 located under the rubber seal on the 

right end of the unit and connect the other end to the device you wish to charge. 

Monitor charging status 

on the device. Some devices require higher output USB. If device does not charge, use charger that 

came with device.

 

Unit must be connected to AC to charge devices via USB

: 

it will not charge when 

operating on backup battery.

Lithium Battery Warning 

The backup battery in this unit uses is a Lithium battery
•  Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, 

fire, or high temperatures & not handled appropriately

•  Do not place loose batteries in a pocket, purse, or other container containing metal objects. Do not  store 

with hazardous or combustible materials.

•  Store in cool, dry, ventilated area. Keep Battery Pack away from moisture.
•  Follow applicable laws and regulations for transport and disposal.  

Charging Devices Using the USB Port

Summary of Contents for IM14


















Reviews:

No comments