13
Using FM Radio in Other Countries
Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to
USA frequency steps. To use the radio outside the USA:
1. Make sure unit is OFF.
2. Press and hold the
Mode Button
for 5 seconds until “USA” appears in the display and a beep sounds.
3. Press and release
–
or
+
Buttons
to cycle to your location: Europe, Japan, Australia, China or USA.
4. Press the
Mode Button
again to exit frequency setting mode. 2 beeps will confirm setting.
Snooze/Dimmer Button
1. To program Snooze, press and hold the
Snooze/Dimmer Button
during normal operation (when no
alarm is sounding). A beep will sound the current snooze duration will flash.
2. Press the
–
or
+ Buttons
to select the desired snooze time (between 01 and 29 minutes).
3. Press and release the
Snooze/Dimmer Button
to confirm Snooze setting. 2 beeps will sound.
4. While the alarm is sounding, press and release the
Snooze/Dimmer Button
to temporarily silence the
alarm for the set duration (9 minutes is the default). Snooze can be used several times during alarm.
5. To adjust the brightness of the display, press and release the
Snooze/Dimmer Button
during normal
operation (when no alarm is sounding) to cycle through the brightness display settings.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit off.
1. To set Sleep time, press and release the
Sleep Button
as needed to cycle to the desired sleep
duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit off).
2. Press the
or
Buttons
to adjust the sleep volume on the unit. Note that the sleep volume setting is
stored separately from other volume settings.
TIP: To exit Sleep mode and turn the unit off before Sleep time expires, you can also press the
Power Button
.
Using the
K2
