F M R A D I O
Fully extend the FM radio antenna on the back of the unit. Do not alter,
strip or attach to other antennas.
Press the
Mode Button
to access FM radio mode. If off, the unit will
power on. The currently tuned station frequency will appear in the
display.
Press the
+
or
–
Buttons
to tune to a desired FM radio station; press and hold
to scan rapidly to the next clear station. Press the
Volume Buttons
on
the unit to adjust listening level. When you are through listening, turn the
unit off by pressing the
Power Button
.
USING THE RADIO IN OTHER COUNTRIES
Different regions of the world use different FM radio frequency steps and
ranges. You will need to select the one that matches the standards in your
region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is
USA; if you live in the US, you may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the
Mode Button
for about 5 seconds until “FM” and the region flashes in the
display. Press the
+
or
–
Buttons
as needed to set the display to your region:
USA, EU (Europe), JPN (Japan), AUS (Australia), or CHN (China).
2. Press and release the
Mode Button
again (or no button within 10 seconds)
to exit the radio frequency setting mode. Two beeps will confirm radio
frequency setting.
S L E E P M O D E
Sleep mode lets you sleep to the current FM radio station. Press the
Mode
Button
to access FM radio mode. Press the
Sleep Button
as needed to
cycle to the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF
(turns sleep mode off). Press the
Volume Buttons
on the unit to
adjust sleep listening level. The unit will revert to normal volume level
when sleep mode ends. Press the
Sleep Button
during sleep to view the
remaining sleep time; press again to set sleep to next (lower) sleep
duration.
10
