iDM8N1
Using the
4
Using Bluetooth: Pairing Your Device
Update by : July 25, 2013
P8
NOTE
: See the iDM8N1 Bluetooth Connection Guide for complete pairing details.
1. Move the
Off/Bluetooth/Aux Switch
to the Bluetooth position (center). The green and amber
lights flash on front of the unit and it beeps twice to indicate auto-pairing attempt.
2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
3. Press and hold the
Pairing Button
for 2 seconds. A tone will
sound and green and amber lights will flash while the unit
attempts to pair. “iHome iDM8N1” should appear on your
device’s menu. If “Not Paired”, “Not Connected” or similar
appears, tap on “iHome iDM8N1” to begin pairing. If your
device asks for a password, enter
1234
on the keyboard
of your device. If no device is paired within 3 minutes, the
unit will power off. If this occurs, retry steps 1-3.
4. Once paired with a device, a tone will sound and the green
light will glow steadily. There should be an indication on
your device that pairing is complete. On some devices, you
must then select “Use as Audio Device (stereo)” or similar on
the device’s Bluetooth menu. Once paired, your device
should link to the iDM8N1 whenever within range.
