background image

quick start

Attach AC adaptor cable to

jack on back of the iH7 and

plug the other end into a

wall socket.

Snap AM antenna into provided

stand, then plug antenna cable

into socket on back of iH7.

Move antenna 12” away.

Press the Radio button and

press again to select AM/FM

band. Turn the Set Wheel to

tune in a station. Press and hold

 a preset button (1, 2,3 or 4) to

save the station as a preset.

Insert iPod®  into dock with proper

insert (iPod must not be in a skin

or case) OR insert shuffle into shuffle

dock. Both iPod and shuffle will

charge while docked. Press iPod

Button on iH7 to play iPod.  Turn

on shuffle, press play on shuffle and

iPod button on iH7 to play shuffle.

Select the dock insert for your

 iPod® model from the table

 below and place insert in dock.

Never dock an iPod without

an insert in place.

• Press & hold the Time Zone

  button on back until it flashes
• Turn the Set Wheel to select

  your time zone
• Press the Time Zone

  button again.
• Move the DST switch on back

  of unit to +1 or -1 (adds or

  subtracts an hour)

1

1:power

2:antenna

6:radio

3:inserts

4:time

NOTE: If you do not have an insert for your iPod, please visit an Apple store,

www.ihomeaudio.com, or call iHome toll free at 800-288-2792 to purchase one

iPod photo thin (20, 30 GB)
Insert 6

thin (20, 30 GB) iPod photo

5:iPod/shuffle

iPod photo thick (40, 60 GB)
Insert 7

thick (40, 60 GB) iPod photo

iPod nano
Insert 8

iPod   nano

iPod with video (30 GB)
Insert 9

thin (30 GB) iPod with video

iPod with video (60 GB)
Insert 10

thick (60 GB) iPod with video

Summary of Contents for iH7














Reviews: