background image

9

Alarm Operation

1. Set the alarm time per 

Setting Alarm Time 

(see page 7).

2. Press the 

 

Alarm On/Off Button

 to arm or disarm the alarm. When armed, the alarm time displays for 2 seconds.

3. When the alarm is sounding, press the 

 

Power Off/Alarm Reset Button

 on the iH18 to turn the alarm OFF. The

alarm will come on again the next day at the same time.

4. To stop the alarm from coming on the following day, press the 

 

Alarm On/Off Button

 to turn it OFF. The 

Alarm Icon

will disappear to indicate the alarm is disarmed.

5. If the alarm is not turned off after it sounds it will beep for approximately 1 hour then turn off automatically. This cycle

will repeat every 24 hours unless the controls are changed.

Travel Lock

The iH18 features a Travel Lock Switch (located on the back of the unit) to prevent settings from being inadvertantly changed

if buttons are accidently depressed in transit. When the Travel Lock Switch is in locked position, all button functions are

blocked and the locked icon will appear on screen. Move the Travel Lock switch to the unlocked position to enable all button

functions.

NOTE: To avoid possible damage, make sure your shuffle is not docked in the iH18 during transit.

Summary of Contents for iH18

















Reviews: