3
Color Change Mode
1. Place proper insert for your iPod (see insert table on Quick Start Section) in Dock, then gently dock iPod. When docked,
iPod will charge until fully charged. The iPod will not overcharge.
2. Press the
Button
on the iH15 to listen to your iPod. The power on indicator will light up to show the iH15 is on.
Make sure your iPod is in play mode.
3. Press the or
Button
Volume to adjust the volume.
4. To switch off the unit, press the
Button
again.
Playing and Charging your iPod
1. Plug one end of an audio patch cord (
available at ihome.com
) into the headphone or line-out jack on your audio
device and the other end of the patch cord into the iH15 Line-in Jack located on the back of the unit.
2. Press the
Button
on the iH15 to play your audio device. The power on indicator will light up to show the iH15
is on. Place your device in play mode.
3. Press the or
Button
to adjust the volume.
4. To switch off the unit press the
Button
again. Remember to turn off your audio device, too.
Using the Line-in Jack
There are 5 color settings. Press the
Color Button
to cycle through them. The settings are: slow color change, fixed color,
fast color change, fixed color and light off.
