iHome iH12 Manual Download Page 12

Trouble Shooting

10

Unit doesn’t respond
(no power)

iPod cannot dock 
properly

AC adaptor isn’t plugged to a wall outlet or 
the connector is not plugged into the power 
supply jack on the back of the unit 

Wall outlet is not functioning

Plug the AC adaptor into a wall outlet and plug the connector into 
the power supply jack on the unit

Plug another device into the same outlet to confirm the outlet is working

iPod does not 
respond to the unit

iPod is not installed properly

iPod is not installed properly

Using no or wrong iPod insert

Remove your iPod from the connector and check for any 
obstruction on the connectors in the dock and on your iPod. 
Then reseat it in the dock.

iPod didn’t charge 
up

iPod is not installed properly

Remove your iPod from the connector and check for any 
obstruction on the connectors in the dock and on your iPod. 
Then reseat it in the dock.

Sound is distorted

Volume level is set too high

Decrease the volume.

Sound source is distorted

If iPod original sound source is poor quality, distortion and noise 
are easily noticed with high-power speakers.
Try a different audio source such as a music CD.

Remove your iPod from the connector and check for any 
obstruction on the connectors in the dock and on your iPod. 
Then reseat it in the dock.

iPod is locked up

Using 1

st

 or 2

nd

 generation iPod or other device

Your iPod software is too old

Upgrade software on your iPod. For details, visit 
http://www.apple.com/ipod/download

Please make sure your iPod is working properly before docking 
it to the unit. Please refer to your iPod manual for details on 
iPod operation.

Solution

Symptom

Possible Problem

Make sure the dock insert is the proper fit for your iPod

iH12 cannot control those iPods or other devices.

iPod is locked up/frozen

iPod battery has problem

Please make sure your iPod is working properly before docking 
it to the unit. Please refer to your iPod manual for details.

Remote Control is not pointed toward the 
IR sensor

Point the Remote Control toward the IR sensor, within 10 feet of 
the unit.

If you are using an iPod Shuffle or external sound source like 
older generation iPod, try reducing the output volume on the 
device itself. Also, try turning bass boost OFF.

Remote Control 
didn’t work

Battery weak

Replace with new battery

Summary of Contents for iH12















Reviews: