iHome iDM8 Instruction Manual Download Page 11

7

Internal Rechargeable Lithium-ion Battery 

 

This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device.  If you suspect your 

battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. 

WARNING/DISPOSAL OF UNIT

 

Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery, 

you should follow the disposal instructions below:

•  Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. 
•  Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the 

disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of 
the device in a waste bin for electronic devices.

•  Many electronics retailers now recycle batteries and other electronic components at no charge.  Check to see which ones in 

your area do so.

CAUTION

 

The battery used in this device may present a risk of fire, explosion or chemical burn if mistreated

•  Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
•  Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic 

substance.

•  Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. Leakage or 

deterioration of the battery may occur if this warning is not heeded.

•  Never expose the battery to any liquid.
•  Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle 

where excessive internal temperatures may be encountered.

•  Always keep the battery out of the reach of infants and small children.

P11

Summary of Contents for iDM8
















Reviews: