Playing Audio Via Bluetooth
1. Move the
Travel Lock/Aux/Bluetooth Switch
to the Bluetooth position to listen to audio
streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.
2. Connect the Left and Right speakers using the 3.5 mm stereo connection cable.
3. Press and release the
Button
to turn on the unit. The blue light will flash as the unit
searches for a previously paired device, and then turn solid blue when a previously paired
device is detected.
4. Press and release the
Button
to play or pause audio from your Bluetooth device.
NOTE
: Play/Pause only works in Bluetooth mode. It does not control aux line-in devices.
5. Use the
/
- Buttons
to adjust volume.
6. When done listening, press the
Button
to turn the unit off.
P9
5
1. Move the
Travel Lock/Aux/Bluetooth Switch
to the Bluetooth position to use the speakers as a
speakerphone for a linked Bluetooth-capable phone during an incoming or active call. The right speaker
(which contains the speakerphone mic) is muted during a speakerphone call; only the left speaker emits
audio.
2. Connect the Left and Right speakers using the 3.5 mm stereo connection cable.
Speakerphone cannot operate unless both speakers are connected together.
3. Press and hold the
Button
to turn on the unit (release when blue light appears).
4. Use the
/
- Buttons
to adjust volume. You may wish to adjust the volume on your audio device,
too.
5. When a call is received, playing music is muted to hear the ring tone. Press the green
Button
to
answer the call, or press the red
Button
to ignore it.
6. When the call is completed, press the
Button
or
Button
to end the call and resume previous
function.
Using the Speakerphone
