iHome
iBTW390
2s
7
Pairing Your Bluetooth Device
Pairing establishes a unique communication connection between your Bluetooth device and the
speaker. Once paired, you will be able to stream audio wirelessly to the iBTW390. When AC power
is connected, and the
Button
OR or
Bluetooth Button
is pressed, the iBTW390 will attempt to
autolink to a previously paired device.
1. Turn on your Bluetooth device and make it “discoverable” by turning on
Bluetooth mode (check in Connections or Settings).
2. Press the
Button
to turn on the iBTW390.
The first time the unit is powered
on it will enter pairing mode automatically
. After this, you will need to pair
using the Bluetooth Button after powering on (see step 3 below).
3.
Press and hold
the
Bluetooth
Button
on back of the iBTW390 for 2
seconds. “PAIR” will appear on the display and the Bluetooth indicator will flash
blue, a voice prompt will announce "PAIRING", indicating the iBTW390 is in
pairing mode.
4. Select “iHome iBTW390” in your device’s Bluetooth menu to connect device. If
prompted for a passcode, enter “1234” on your device’s keypad.
5. If pairing is successful, a voice prompt will announce “CONNECTED”, then Bluetooth indicator appears
solid blue, indicating the iBTW390 is ready to play music. There should also be an indication on your
device. If no device is successfully paired within 3 minutes the iBTW390 will default to previous mode.
Once the iBTW390 is paired to a device, it will attempt to autolink when the device is within range
(about 33 feet). To reset Bluetooth, press and hold the
Bluetooth Button
for 10 seconds.