background image

9

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure your 

personal safety.  However, improper use can result in potential electrical shock or fire hazards. Please 

read and follow all safety and operating instructions carefully before installation and use, and keep 

these instructions handy for future reference. Take special note of all warnings listed in these 

instructions and on the unit.

1.

Water and Moisture – The unit should not be used near water. For example: near a bathtub,

washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2.

Ventilation – The unit should be situated so that its location or position does not interfere with its

proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface

that may block ventilation openings.  Also, it should not be placed in a built-in installation, such

as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.

3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves

or other appliances (including amplifiers) that produce heat.

4.

Power Sources – The unit should be connected to a power supply only of the type described in

the operating instructions or as marked on the appliance. Only use the AC adapter that came

with the unit.

5.

Power-Cable Protection – Power supply cables should be routed so that they are not likely to be

walked on or pinched by items placed upon or against them.  It is always best to have a clear area

from where the cable exits the unit to where it is plugged into an AC socket.

6.

Cleaning – The unit should be cleaned only as recommended.  See the Maintenance section for

cleaning instructions.

7.

Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not

spilled into any openings or vents located on the product.

8.

Attachments – Do not use attachments not recommended by the product manufacturer.

9.

Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the

antenna or cable system during a lightning storm or when it is left unattended and unused for

long periods of time. This will prevent damage to the product due to lightning and power-line

surges.

10. Overloading  – Do not overload wall sockets, extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

11.

Damage Requiring Service – The unit should be serviced by qualified service personnel when:

A. the power supply cable or plug has been damaged.

B. objects have fallen into or liquid has been spilled into the enclosure.

C. the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.

E.

the unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a

month or longer, remove batteries before storage

13. Servicing – The user should not attempt to service the unit beyond those methods described in

the user manual.  Service methods not covered in the operating instructions should be referred

to qualified service personnel.

14. Magnetic Interference: This product’s speakers contain powerful magnets which could cause

interference or damage to sensitive equipment such as hard drives, CRT televisions and monitors,

as well as medical, scientific, and navigational devices. Keep this unit away from these products

at all times.

15. Only use attachments/accessories specified by the manufacturer.  This product is suitable for use

in tropical and/or moderate climates.

16. The unit should be serviced by qualified service personnel when the enclosure damaged  or does

not operate normally.

17. No naked flame sources, such as lighted candles, should be placed on the apparatus.

18. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture”

19. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

20. Do not dispose of batteries in the household trash or fire

21. The mains plug of power adaptor is used as the disconnect device, it shall remain readily

operable.

Summary of Contents for iBTW281












Reviews: