Model: iBT60 (Back)
IB (English)
Size: 324Wmm x 184Hmm
Color: Print in Black color
Date: May 21, 2013
Charging the iBT60
USB
Using Bluetooth with the iBT63
Speaker
Bluetooth/Power
On/Off Switch
USB
Audio/Charging Jack
Aux Jack
LED
Charging the iBT63
Bluetooth Mode
Aux-in Mode
mobile phone
PSP
iPod
Laptop
PC
MP3/MP4
• Slide the
Bluetooth/Aux/Off Switch
on the speaker to the Bluetooth
position ( ). The light will flash blue as the speaker attempts to auto-link
with the last previously linked unit in range (30 feet). If no device is
found within 10 seconds, the light will flash blue and red to indicate
pairing attempt.
• Place your audio device in Bluetooth mode (often found in the device’s
Settings or Tools menu) and make it “discoverable”. “iHome iBT60”
should appear on your device. If “Not Connected” or similar message
appears, select it to connect.
• Once paired, the light will glow solid blue and a confirmation beep will
sound. If pairing is not successful, turn the power OFF ( ) on the
speaker and repeat pairing procedure.
• To listen to Bluetooth audio, make sure the speaker is in Bluetooth
mode ( ).
• Control Bluetooth audio from your device.
Remember to turn off the speaker and your device after listening.
NOTE: When unit is charging, the blue light will appear solid red.
Using Bluetooth with the iBT60
The iBT60 is powered by a rechargeable battery in the speaker. When the
light flashes red, or if you start to notice sound distortion at higher
volumes, it's time to recharge the batteries.
• Connect the mini-USB plug to the USB Audio/Charging jack on
the speaker.
• Connect the larger USB plug to a powered USB port, such as that on a
computer. The light on the speaker will turn to solid red while charging
and turn off when fully charged.
The rechargeable battery in your speaker can only be replaced by
iHome Consumer Repair Department.
Charging the iBT60
Locking and Unlocking the iBT60
To unlock and expand the speaker, grip the top and bottom and give a
small twist counter-clockwise. DO NOT pull hard once open, as the built in
spring will automatically extend the speaker to its proper position.
To compress and lock speaker, line up lock tab on speaker top with
lock/unlock icon on base. Press speaker down from the top and twist
clockwise to lock in place.
• Connect the mini-USB plug to the
USB Audio/Charging jack on
the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack or line-out
of any audio device.
• Slide the
Bluetooth/Aux/Off Switch
on the speaker to the ON ( )
position. The blue power light will come on.
• Press play on your audio device and adjust its volume to listen to audio.
• If you wish to “daisychain” iBT60 speakers, connect the 3.5mm audio
plug to the Line Out Jack on an iBT60 that is already connected to an
audio source (see above) and the mini-USB plug to the audio input jack
on another iBT60.
Using the iBT60 with Aux Devices
Mini USB plug
Standard
USB plug
3.5mm audio
plug
Combination cable
Note: you can continue to
listen to the speakers while
they are charging.
