Playing Audio via Aux In
1. Connect a standard stereo audio cable (not included) to the Aux-in Jack
on the right side of the unit and connect the other end to the headphone
or line-out jack on your audio device.
2.
Press and hold
the
Power Button
for 2 seconds to turn on the unit.
3. Power on the audio device and use the controls on the device to play or
pause audio and to navigate tracks.
4. Press the
or
Button
to adjust the iBT374 volume. You can also adjust
volume on your device.
5. When done listening,
press and hold
the
Power Button
for 2 seconds to
turn off the unit. Remember to turn off your device, too.
NOTE
: Any Bluetooth audio must be paused or you will not hear Aux-in audio.
Using Color Modes
There are six color modes, which you cycle through in this order:
a. Slow Fade (colors slowly fade from one into the next
b. Fast Change (colors change rapidly)
c. One Color (select a favorite color)
d. Pulse to Music (lights flash to the beat of the music)
e. Preset Pulsing (each light array pulses through its own preset pattern of
colors)
f. Off (no display)
1.
Press and hold
the
Power Button
for 2 seconds to turn on the unit.
2. Press the
Color Mode
Button
repeatedly to cycle to the desired color
mode. For One Color mode, first cycle to Fast Change mode and press the
Color Mode Button
when the desired color appears. For Pulse to Music,
make sure the volume on your connected Bluetooth device is above 30%.
3.
Press and hold
the
Power Button
for 2 seconds to turn the unit off.
9
Using the
iBT374
