Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT33. Once your device is
paired, the iBT33 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and
make it “discoverable” by turning on Bluetooth mode (check in Options or Settings).
2. Press the
Power Button
to turn on the iBT33.
The first time the unit is powered
on
, it will enter auto-pairing mode and attempt to connect to a Bluetooth device (if
so, skip to step 4). Otherwise, follow step 3 to begin pairing.
3.
Press and hold
the
Play/Pause/Pairing Button
for 2 seconds. The iBT33 will
beep and the Bluetooth status indicator light on front of the unit will flash quickly.
4. “iHome iBT33” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or
similar message appears, select “iHome iBT33” to connect it. If prompted for a passcode, enter
“1234” on your device’s keypad.
Using the
iBT33
iHome iBT33
6
P7
5. If pairing is successful, 1 beep will sound and the Bluetooth status indicator light will appear solid blue,
indicating the iBT33 is ready to play music. There should also be an indication on your device. If no
device is successfully paired within 3 minutes the iBT33 will default to previous mode. Once the iBT33 is
paired to a device, it will attempt to autolink when the device is within range (about 30 feet).
Pairing Your Device
For iPhone
iHome iBT33
iHome iBT33
iHome iBT33
iHome iBT33
For other
iHome iBT33
