7
P8
Setting and Using the Alarm (Continued)
4. Press the
–
or
+
Buttons
to select the desired wake to alarm source: Bluetooth, radio or tone.
Wake to Bluetooth
: You will wake to the currently linked Bluetooth device. If no device is
detected, the alarm will default to current Tone.
Wake to Radio
: Press the
Alarm Button
to confirm. Press the
Presets Button
to select an FM preset
to wake to, or press the
–
or
+
Buttons
to tune in a desired wake to station.
Wake to Tone
: Press the
Alarm Button
to confirm. Press the
–
or
+
Buttons
as needed to listen to
and to select one of the four built-in wake-to tones (1 - 4).
5. Press the
Alarm Button
to confirm the alarm source. The volume display will flash.
6. Press the
or
Buttons
to adjust the alarm volume. Note that the alarm volume setting is stored
separately from other volume settings.
7. Press the
Alarm Button
to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
Previewing the Alarm and Turning the Alarm On/Off
1. Press and release the
Alarm Button
to view the current alarm time.
2. Press and release the
Alarm Button
as needed to toggle the alarm ON and OFF, indicated by the alarm
icon and a beep.
Using the
iBT31
