iBT16
Using the
Playing Audio via Aux In
Playing Audio via Aux Out
6
P10
1. Move
the
Power OFF/Bluetooth/Aux Switch
to the Aux position (right) to listen to audio via aux in.
The
Power/Charging/Pairing Indicator Light
on the back of the unit will glow blue.
2. Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the
3.5 mm audio plug to the headphone or line-out jack on your audio device.
3. Power on the audio device and use the controls on the device to play or pause audio, navigate tracks
and control volume.
4. When done listening, move the
Power OFF/Bluetooth/Aux Switch
to the OFF position (left) to turn
the unit off. Remember to turn off your audio device, too.
You can connect the unit to an external speaker via the Aux-out jack located on the back of the unit to
expand the audio playing in Bluetooth or Aux-in modes.
1. Connect a 3.5 mm audio cable plug to the Aux-out jack on back of the unit and connect the other
end to the line-in jack on your external speaker. Note that the aux output signal is mono.
2. Move
the
Power OFF/Bluetooth/Aux Switch
to the Bluetooth position (center) or Aux position (right)
to listen to audio via the selected mode.
3. Power on the audio device and use the controls on the device to play or pause audio, navigate tracks
and control volume.
4. When done listening, move the
Power OFF/Bluetooth/Aux Switch
to the OFF position (left) to turn
the unit off. Remember to turn off your audio device, too.
