iHome iBN180, Instruction Manual

Page: 11 / 19

Setting and Using FM Presets
The unit allows you to store up to 6 FM radio station presets
1. Press the
Button
on the unit to turn it on.
2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio
frequency appear on the display.
3. Press and release the
Presets Button
as needed until the preset number (P1- P6) you wish to set is
displayed, then press and hold the
Presets Button
to enter setting mode.
4. Press the – or +
Buttons
to tune the radio to the desired station (hold to scan for the next clear station).
5. Press and release the
Presets Button
to confirm. 2 beeps will sound to confirm the preset has been
assigned. Continue steps 3 - 5 until you have set up to 6 preset stations.
6. To listen to a preset FM station at any time, follow steps 1 - 3 to turn on FM radio mode and cycle to
the desired preset. NOTE: If no Bluetooth device is linked/paired, pressing the
Presets Button
when
the unit is OFF will turn the unit ON in the last active mode.
Using FM Radio in Other Countries
Different areas of the world use different FM frequency steps and ranges. By default, this unit is set
to USA frequency steps. To use the radio outside the USA:
1. Make sure unit is OFF.
2. Press and hold the
Mode Button until “USA” flashes in the display.
3. Press and release – or +
Buttons
to cycle to your location: Europe, Japan, Australia, China or USA.
4. Press the
Mode Button
again to exit frequency setting mode. 2 beeps will confirm setting.
Using the
iBN180
9
P10
Using the
iBN180
10
P11
Setting and Using the Alarms
This unit has 2 separate alarms, each set the same way. Below we explain how to set Alarm 1.
To set alarm 2, follow the same steps using the Alarm 2 Button.
Note : each step must be completed while display is flashing or step will time-out with any changes saved.
1. Press and hold the
Alarm 1 Button
for 2 seconds until the time display and alarm icon flash.
2. Press the – or +
Buttons
to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear on the left of the
display.
3. Press the
Alarm 1 Button
to confirm the alarm time setting. The
wake-to
source will flash.
4. Press the – or +
Buttons
to select the desired wake to alarm source: Bluetooth, radio or tone.
Wake to Bluetooth : You will wake to the currently linked Bluetooth device. If no device is detected, the
alarm will default to current Tone.
Wake to Radio
: Press the
Alarm 1 Button
to confirm. Press the
Presets Button
to select an FM
preset to wake to, or press the – or +
Buttons
to tune in a desired wake to
station.
Wake to Tone
: Press the
Alarm 1 Button
to confirm. Press the
–
or
+ Buttons
to select one of the
four built-in wake-to tones.
5. Press the Alarm 1 Button to confirm the alarm source. The volume display will flash.
6. Press the or
Buttons
to adjust the alarm volume on the unit from 05 - 40. Note that the alarm volume
setting is stored separately from other volume settings.
7. Press the
Alarm 1 Button
to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
clock setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.