background image

FRONT

DC     12V, 1.5A

Bedside Speaker System

Model: iAV2v2

for Amazon Echo Devices

QUICK START GUIDE

»

  

iAV2v2 

 

» 

 

USB cable  

» 

 

Universal voltage adapter  

 

» 

TIP: Press the + and – Buttons on iAV2v2 together during clock setting to switch

    display from standard 12 hour to 24 hour display.

1  Clock Setting Button

Press and hold

 for 2 seconds 

until clock starts flashing 
to start clock setting. Adjust 
with +/– Buttons. Press again 
to complete clock setting.

NOTE: Alexa cannot set clock

2/3  +/– Setting Buttons

Press and release to adjust 
clock during setting 
(hold for rapid adjust)

4 Dimmer Button

Press and release to adjust 
display brightness from high 
to off.

5  Backup Battery Compartment

Unscrew door with Phillips 
screwdriver. Insert  1 CR2450  
battery as shown to maintain 
clock setting during power 
interruption.

6/7 AC adapter/DC Jack 

Connect the included 
AC adapter to the DC jack 
located on the back of the 
unit and connect the other 
end to a working wall outlet.

8/10 USB Charging Ports

Connect a standard USB 
cable (not included) to 
charge mobile devices.

9 Hardwired AUX cable 

BOTTOM

TOP

Amazon Echo Device Dock

» 

Docking adapter  

www.ihome.com     Toll Free: 1-800-288-2792

Made in China     Patents: www.ihome.com/patents

iAV2v2

MODEL

iAV2v2-A-A

Service Number:

DC       3V, CR2450 x 1

Clock Backup:

DC       12V, 1.5A

AC Adaptor:

Designed and Engineered in the USA

Made for the Amazon Dot (2nd Gen)

Manufactured & Serviced by SDI Technologies Inc.

RESETRESET

TESTTEST

Printed in China

iAV2v2-180719-A

FCC Information

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

FCC Radiation Exposure Statement 

The device has been evaluated to meet general RF exposure requirement. 

The device can be used in portable exposure condition without restriction.

•  Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void 

the user’s authority to operate the equipment.

•  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 

of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)
Canada Statement

This device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two 

conditions: 

(1)  This device may not cause interference; and 

(2)  This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation 

est autorisée aux deux conditions suivantes : 
(1)  l’appareil ne doit pas produire de brouillage; 

(2)  l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en 

compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. 

The device can be used in portable exposure condition without restriction.

le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.

l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.

WARNING/DISPOSAL OF UNIT

To dispose of the unit, follow the instructions below:
•  Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. 
•  Always dispose of used batteries/electronics in accordance with the prevailing community regulations. 
•  Many electronics retailers now recycle batteries and other electronic components at no charge.

GENERAL BATTERY PRECAUTIONS

•  Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other 

electrolytic substances.

•  Never expose a battery to any liquid.
•  Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle 

where excessive internal temperatures may be encountered.

•  Always keep batteries out of the reach of infants and small children.

Model: iAV2v2

IMPORTANT SAFETY INSTRUCTIONS

When used in the directed manner, this unit has been designed and manufactured to ensure 
your personal safety. However, improper use can result in potential electrical shock or fire 
hazards. Please read and follow all safety and operating instructions carefully before installa-
tion and use, and keep these instructions handy for future reference. Take special note of all 
warnings listed in these instructions and on the unit.

1.  Water and Moisture – The unit should not be used near water. For example: near a bathtub, 

washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.”

2.  Cleaning – The unit should be cleaned only with dry cloth. Do not use solvents, etc”
3.  Ventilation – The unit should be situated so that its location or position does not interfere 

with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or 
similar surface that may block ventilation openings. Also, it should not be placed in a 
built-in installation, such as a bookcase or cabinet, which may impede the flow of air 
through the ventilation openings.”

4.  Heat – The unit should be situated away from heat sources such as radiators, heat registers, 

stoves or other appliances (including amplifiers) that produce heat.”

5.  Only use attachments/accessories specified by the manufacturer.”
6.  Lightning and Power Surge Protection – Unplug the unit from the wall socket and discon-

nect the antenna or cable system during a lightning storm or when it is left unattended and 
unused for long periods of time. This will prevent damage to the product due to lightning 
and power-line surges.”

7.  Damage Requiring Service – The unit should be serviced by qualified service personnel 

when:
A. the power supply cable or plug has been damaged.
B.  objects have fallen into or liquid has been spilled into the enclosure.
C.  the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E.  the unit exhibits a marked change in performance or does not operate normally”

8.  No naked flame sources, such as lighted candles, should be placed on the apparatus”
9.  Attention should be drawn to the environmental aspects of battery disposal.”
10. CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the 

same or equivalent type.”

11. The power adapter, used as the disconnected device, It is always best to have a clear area 

from where the cable exits the unit to where it is plugged into an AC socket.”

WARNING

Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button 
cell battery. If the coin/button cell battery is swallowed, it can cause severe internal 
burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not 
close securely, stop using the product and keep it away from children. If you think 
batteries might have been swallowed or placed inside any part of the body, seek 
immediate medical attention.

For warranty and full instructions 

visit: www.ihome.com/support

© 2018 SDI Technologies, Inc. All rights reserved.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

6

1

2

3

4

5

10

9

8

7

Summary of Contents for iAV2v2







Reviews: