Model: iUV3 QSG
Instruction manual - US English
Size: 400mm(W) x 150mm(H)
Folded Size: 80 x 150 mm
157g Art paper / 1C + 1C / Straight corners
Mar 11, 2021
WARNING
-
To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture.
ATTENTION:
Use only the supplied power adapter. This product must only be
supplied at safety extra low voltage corresponding to the marking on the
appliance.
The mains plug of power adaptor is used as the disconnect device, it shall remain
readily operable.
ATTENTION:
Prolonged or excessive exposure to UV-C light may degrade and
discolor fabrics, plastics and other non-metallic materials.
Keep operation away from strong magnetic fields.
• Device is intended for indoor use only, do not use outdoors or on wet surfaces.
• Device should be protected from the elements and from temperatures below
freezing.
• Do not operate/drop near water or while bathing or swimming, do not handle
the device with wet hands.
• Only use as intended. Use according to this manual’s instructions without
tampering or modifying the device in any way.
• Do not alter the construction or design. Do not remove safety labels, markings
or devices.
• Do not use device for other than its intended purpose, as described in the
manual.
• Do not operate if any damage to the unit is visible or suspected, such as after
being dropped.
• Do not use if charging cable/cord is damaged.
• Keep the cable/cords and device away from heated surfaces.
• Close supervision is necessary when any appliance device is used by or near
children and people with special needs.
• Do not operate in the presence of explosives and/or flammable fumes, smoke
or liquids.
• Do not use this product near water.
• Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as
Benzene, thinner or similar materials can damage the surface of the unit.
• Heat – This product should be situated away from heat sources such as
radiators, heat registers, stoves or other appliances (including amplifiers) that
produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this product during lightning storms or when unused for long periods of
time.
• Damage Requiring Service – This product should be serviced by qualified
service personnel when:
- Plug has been damaged.
- objects have fallen into or liquid has been spilled into the enclosure.
- the unit has been exposed to rain.
- the unit has been dropped or the enclosure damaged.
- the unit exhibits a marked change in performance or does not operate
normally.
• No naked flame sources, such as lighted candles, should be placed on this
product.
• Attention should be drawn to the environmental aspects of battery disposal.
• This product is suitable for use in tropical and/or moderate climates."
Disclaimer:
This product is not intended to diagnose, treat, cure or prevent any
disease or medical condition. The information provided herein is not to be
construed as a medical diagnosis or medical advice. No medical claims are implied
or intended with the sale of this device. Purchaser accepts responsibility for correct
and proper use of device.
1 Year Limited Warranty
For warranty and full instructions, visit
ihome.com/support
© 2021 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
Model: iUV3
Quick Start Guide
QUESTIONS? visit www.ihome.com
iUV3-QSG-031121-A
Printed in China
H E A L T H
360° UV-C Sanitizer
and Alarm Clock
TOP PANEL
BACK PANEL
Set (Reverse)
Sanitize
Snooze/Dimmer
*Remove battery pull tab before use
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
ISED information
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian
information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies
pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent
obtenir des informations canadiennes sur l'exposition aux RF et la conformité.
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre
le radiateur et votre corps.
Tout changement ou modification non expressément approuvé par la partie responsable
de la conformité peut annuler l'autorité de l'utilisateur à utiliser l'équipement.
CAN ICES-3 (B) / NMB-3(B)
SETTING THE ALARM
1.
Press and hold
the
Alarm Button
for 2 seconds until
the display flashes. A beep sounds. Release the
Alarm Button
.
2. Press the
–
or
+ Buttons
to adjust the alarm time to
the desired time (hold for rapid setting). Make sure
you set the correct AM/PM alarm time. The PM
indicator appears to the left of the display. (There is
no AM indicator.)
3. Press the
Alarm Button
to confirm the alarm time
setting. The alarm schedule will flash: 7 (every day),
5 (weekdays) or 2 (weekend only). Press the
–
or
+
Buttons
to select an alarm schedule.
4. Press the
Alarm Button
to confirm the alarm
settings and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will
remain on the display, to show the alarm is armed.
To Preview:
Press and release the
Alarm Button
to
view the current alarm time.
Turning Alarm ON/OFF:
Press and release the
Alarm
Button
twice within 5 seconds to toggle the alarm
ON and OFF, indicated by the related white alarm
indicator
.
When the alarm sounds, press the
Alarm Button
to
disable the alarm and reset it to come on at the same
time the next day.
SNOOZE / DISPLAY DIMMER
Snooze:
When the alarm is sounding, press the
ZZZ/Dimmer Button
to snooze for 9 minutes.
Dimmer:
Press the
ZZZ/Dimmer Button
(when alarm
is NOT sounding) to adjust display brightness.
(Display can be dimmed during Snooze mode.)
CLOCK SETUP
Step One: Connecting the Unit
Connect the included AC adapter to the DC jack on
the back of the unit and connect the other end to a
working wall outlet not controlled by a light switch.
Step Two: Setting Your Clock
Remove battery pull tab from the bottom of the unit.
1. Press and hold the
Time Set Button
(on the back of
the unit) for 2 seconds until the clock display
flashes and a beep sounds. Release the
Time Set
Button
.
2. Press the
– or + Buttons
to adjust the clock to the
current time (hold for rapid setting). Make sure you
set the correct AM/PM time. The PM indicator
appears to the left of the display. (There is no AM
indicator.)
3. Press and release the
Time Set Button
to confirm
the current time setting. The YEAR will flash on the
display. Press the
– or + Buttons
to set the year.
4. Press and release the
Time Set Button
to confirm
the current year setting. The month will flash on the
display. Press the
– or + Buttons
to set the month.
5. Press and release the
Time Set Button
to confirm
the current month setting. The day will flash on the
display. Press the
– or + Buttons
to set the day.
6. Press and release the
Time Set Button
to confirm
settings. 2 beeps will sound to indicate time setting
mode is complete.
Daylight Savings Time:
By default, the
DST Switch
is
set to Auto and will automatically adjust the time in
March/November.
Tip:
Press the
Alarm Button
during clock setting
to toggle between 12/24 hour display modes.
USING THE SANITIZER
This superior quality UV-C LED light safely kills up to
99.9% of surface germs in under 3 minutes, without using
harmful chemicals.
The iUV3 is safe to use on everyday essentials including
eyeglasses, smartphones, cosmetic tools, toothbrushes,
and more.
USING THE UV BRACKETS
Brackets are provided to ensure optimal spacing between
your objects and the UVC LEDs. Swing brackets to a
perpendicular position to provide adequate space.
PROGRAMMABLE SNOOZE
To adjust the snooze duration:
1. Press and hold the
ZZZ/Dimmer Button
.
2. Use the
+ or - Buttons
to adjust the snooze
duration from 1-29 minutes. Press the
ZZZ/Dimmer
Button
again to confirm.
CHARGING DEVICES VIA USB
There is a 1A USB charging port on the iUV3. To
charge your device, connect a standard USB cable
(not included) to the USB port on the unit, and plug
the other end into the charging port on your device.
Note: Unit must be plugged into a working outlet
in order to charge devices.
Battery Back-Up
The unit comes with a CR-2450 back-up battery
installed to provide continuous alarm operation and
clock settings in the event of a temporary power
failure. Remove the battery pull tab before use. When
the battery icon on the clock display is flashing, it is
time to replace the back-up battery. The battery
compartment is located on the bottom of the unit.
1. Make sure the AC adapter is
connected, or you will lose your
time and alarm settings during
battery replacement.
2. Use a Phillips screwdriver to open
the battery compartment door.
3. Remove exhausted battery from
compartment and insert new 1
CR-2450 battery, checking that the +
side is facing you. Replace compart-
ment door. Do not overtighten.
RESET
If you are experiencing abnormal operation, try to
reset the unit. To do so:
Disconnect the AC adapter and remove the backup
battery from the compartment on bottom of the
unit. Wait 2 minutes, then re-install the battery and
re-connect the AC adapter.
POWER
UVC II
Set (Forward)
Alarm/
Alarm Reset
time set
DST set
+1
-1
A
DC input
usb charging
PM Indicator
Sanitize
Status Indicator
Alarm
Indicator
Low Backup
Battery
NOTES
1. Features a built-in safety switch that will shut off the UV
light whenever the lid is opened. Do not attempt to
defeat the safety function and operate the unit with an
open lid.
2. If the lid is opened during the UV sanitizing cycle, the
timer will pause. Closing the lid within 1 minute will
resume the cycle.
3. We recommend leaving the brackets in place while
sanitizing your items. If items are too large, the brackets
may be removed. In those cases we recommend
flipping the items over and sanitizing a second time for
optimal effect.
4. To cancel a sanitizing cycle, press and hold the
Sanitize
Button
for 2 seconds. The clock time will appear on the
display.
SANITIZING ITEMS
1. Make sure the iUV3 is plugged into a working wall outlet
not controlled by a light switch. Lift the lid of the unit and
place items inside, making sure not to overlap items.
Close the lid.
2. Press and release the
Sanitize Button
to begin a UV
sanitizing cycle. A countdown timer will display the
remaining cycle time, the Sanitize status indicator will
appear on the display, and a beep will sound when the
cycle is complete.
3. To extend to the current cleaning cycle, press and
release the
Sanitize Button
again. Each press adds 180
seconds to the cycle, with a maximum cleaning time of
900 seconds. When the cleaning cycle is over, ‘End’ will
appear on the clock display for 2 seconds, and then the
display will show the current time.
Maint Caring For Your Device
• Place the unit on a level surface away from sources
of direct sunlight or excessive heat.
• Remove the plastic protective film from the clock
display.
• Protect your furniture when placing your unit on a
natural wood and lacquered finish. A cloth or other
protective material should be placed between it
and the furniture.
• Should the casing of your device become soiled,
you may wipe down with a moist cloth.
• Do not immerse the device into water or any
cleaning solvents.
• Do NOT use gasoline, benzene, thinner, harsh
cleaners, etc on and/or in the unit while cleaning,
as they may damage the product. NEVER use
alcohol or other solvents.
• This product contains a button/coin cell battery. Do not ingest the
battery, Chemical Burn Hazard. If the button/coin cell battery is
swallowed or placed inside any part of the body, it can cause
severe or fatal internal chemical burn injuries in 2 hours or less.
• If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
• Keep new and used batteries away from children.
• Do not dispose of batteries in the household trash or fire.
• Dispose of used batteries immediately. Attention should be drawn
to the environmental aspects of battery disposal. Many electronics
retailers now recycle batteries and other electronic components at
no charge. To find a drop-off location near you, visit
www.call2recycle.com
• If the battery compartment does not close securely, stop using the
product and keep it away from children.
• CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Maint Caring For Your Device
•
Place the unit on a level surface away from sources of direct
sunlight or excessive heat.
•
Remove the plastic protective film from the clock display.
•
Protect your furniture when placing your unit on a natural wood
and lacquered finish. A cloth or other protective material should be
placed between it and the furniture.
• Should the casing of your device become soiled, you may wipe
down with a moist cloth.
• Do not immerse the device into water or any cleaning solvents.
• Do NOT use gasoline, benzene, thinner, harsh cleaners, etc on
and/or in the unit while cleaning, as they may damage the product.
NEVER use alcohol or other solvents.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these
instructions handy for future reference.
WARNING
-
DO NOT ATTEMPT TO OPERATE THIS DEVICE WITH THE
LID/TOP OPEN
.
The device was designed to shut off automatically when
the lid/top is open. It is important NOT to defeat or tamper with this safety
feature as UVC light can cause damage to eyesight and skin.
All users should be alerted to the potential hazards indicated by the product safety
labeling on the unit and these instructions.
WARNING
-
Use this device only for its intended use as described in this manual.
If the device is not used in the manner specified, the protection provided by the
equipment may be compromised. Always place device on a flat, smooth surface,
in a horizontal position for operational use.
WARNING
-
KEEP OUT OF REACH OF CHILDREN.
This device is not a toy and is not
intended to be used by children.
WARNING
9V, 1.5A
DC input
Model: iUV3
Quick
Quic
Start Guide
360° UV-C Sanitizer
and Alar
m Cl
C ock
k
*R
Remove ba
tt
PM Indic
ator
Low Backup
Battery
