background image

1

Installation

 

Instruction

English

UNPACKING INSTRUCTIONS

!

 Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.

!

  Check  package  contents  against  the  Supplied  Parts  List  in  the  next  page  to  assure  that  all  components  were  received 

   undamaged.  Do not use damaged or defective parts.

!

 Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

Install  and  operate  this  device  with  care.    Please  read  this  instruction  before  beginning  the  installation,  and  carefully 

follow all instructions contained herein. Use proper safety equipment during installation.

Please call a qualified installation contractor for help if you:

!

 If you don't understand these directions or have any doubts about the safety of the installation.

!

 If you are uncertain about the nature of your wall, consult a qualified installation contractor.

Do  not  use  this  product  for  any  purpose  or  in  any  configuration  not  explicitly  specified  in  this  instruction.    We  hereby 

disclaim any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of 

this product.

ST12

Summary of Contents for BONTEC ST12







Reviews: