OPERATION
IC75-2 ENG
3-4
BASIC OPERATION
Start-Travel-Stop
•
When traveling, lower the vessel completely.
•
Lock the rear gate and side gates firmly.
•
Make sure that no persons are around the
machine. Sound the horn before starting.
1. Adjust the traveling speed properly with the travel
speed select switch (1).
2. Push down on the no-mark position of the parking
switch (2) to deactivate the brake.
Make sure that the mark lamp is off.
The parking switch (2) is equipped with the parking
brake safety function for preventing erroneous travel
after turning ON the engine key switch.
After the engine key switch is turned ON, the
machine cannot travel unless the parking switch
(2) is turned ON once and then OFF.
Joystick Lever Operation Procedure
Use the joystick lever as shown below.
Forward: Push the joystick forward.
Stop:
Set the travel joystick lever to the neutral
position.
Backward: Pull the joystick lever backward.