CONTROLS
IC120 ENG
2-13
Engine throttle dial
Use this dial to adjust the engine speed and output.
High: Turn the dial to the
mark position.
Low: Turn the dial to the
mark position.
Engine key switch
Use this switch to start and stop the engine.
OFF position
The key may be inserted and pulled out. All currents
are cut off. Fuel injection stops and the engine stops
when the key switch is set to the OFF position.
ON position
The electrical system is turned on.
The temperature sensor senses the temperature and
the engine is preheated automatically.
The preheat lamp is on during preheating.
START position
Set the key to this position to start the engine.
Release the hand from the key immediately after the
engine starts.
The key returns to the ON position automatically.
Travel speed select switch
Use this switch to change the travel speed in two steps.
High speed: Push down on the
mark. The mark lamp
goes on.
Low speed: Push down the no-mark position. The mark
lamp goes out.
Engine service connector
Connect the engine service tool to this connector when
diagnosing engine troubles.
