14
4.
Repeat steps 2 and 3 to confirm the time format [12H] and [24h].
5.
Repeat steps 2 and 3 to set the [HOUR] and [MINUTE].
6.
Repeat steps 2 and 3 to set the [UNIT].
7.
After the unit is set,the LCD will display “donE”first,then display all the
settings you have done and then it will turn off.
MEASUREMENT PROCEDURE
ATTENTION
• Find time to relax by sitting in a quiet atmosphere for some time before
measurement.
•
Be seated with your feet flat on the floor, and don’t cross your legs.
Place palm upside in front of you on a flat surface such as desk or
table. The middle of the cuff should be at the level of the right atrium
of the heart.
•
Efforts by the patient to support the arm can increase the blood pres
-
sure. Make sure you are in a comfortable, relaxed position and do not
activate any muscles in the arm during measurement.
• Always measure on the same arm (normally left).
•
Remove any garment that fits closely to your upper arm. Do not roll the
sleeve since it can squeeze your hand and this can lead to false results.
•
Use only clinically approved original cuff.
• If you want to follow the results of your blood pressure measurements,
always perform measurements at the same time of day, since blood
pressure changes during the course of the day.
• Measurements should be done after a 5 minute rest to ensure accuracy.
