STEP 1: Connect iOS device to your home Wi-Fi. (Settings->Wi-Fi->On)
STEP 2: Turn Bluetooth “On” on your iOS device and it will start searching
for the Scale.
STEP 3: Wait until the model name, “iHealth HS5xxxxx”, and “Not Paired”
appear on your device’s Bluetooth screen. Select the model name
“iHealth HS5xxxxx” to pair and connect. (Note: it may take up to
30 seconds for your iOS device to detect the Bluetooth signal)
STEP 5: The wireless signal icon on the Scale’s display will flash for a few
seconds and then stabilize when Wi-Fi connection is successful.
The Scale should display as shown below.
The Bluetooth connection will then automatically disconnect from the Scale.
Your scale is now connected to your home Wi-Fi and ready to use.
STEP 4: Select “Allow” in the pop-up window, as shown below.
