Green LED twinkling
Red LED twinkling
Green LED light on
Low battery indicator
(for a few seconds)
Red LED light on
Abnormal state
Without external power
Charging
Fully charged
Green LED light on
Green LED "pulsing"
LED extinguished
Yellow LED twinkling
LED Status
iPod touch, iPhone, and
iPad connected
iPod touch, iPhone, and
iPad unconnected
Note:Battery has limited charge cycles and may eventually need to replaced by
iHealth service provider. Battery life and charge cycles vary by use and settings.
6
STEP 1: Place your iPod touch, iPhone or iPad onto the iHealth Dock
STEP 2: Select and launch the App
STEP 3: Application should now recognize the iHealth Dock and display the battery
capacity
1) When need charge, please connect to power source for charging the battery. The
3.CHARGING AND USING THE BATTERY
The Dock, the cable, the battery and the cuff must be disposed of
according to local regulations at the end of their usage.
Dock can work normally when charging.
2) When connect the BP3 with iPod touch, iPhone, or iPad, the battery volume will be
displayed on the iPod touch, iPhone, or iPad screen. If it is less than 20%, please charge
the battery. The Dock will not work until the battery has enough power.
3) When you charge the Dock, the LED will display with different colors to indicating
the charging status. See the table below for details.
4) Please do not overcharge or over discharge the battery, which may reduce its
lifetime. It is suggested that you charge the battery once the battery is less than 25%,
and when the battery is fully charged, please disconnect the adapter in time.