21
Chapter 4: iGuardware
4.2.2.1 Device Setting
:
Press the “Enumerate” button, iGuardView will start a search for all
iGuard cameras under the same subnet and list them in the main
window.
Once detected, the following will show in the main window:
This shows that the camera is online and active.
This shows that the camera is off-line
Manually adds the iGuard to be monitored.
“Access by iGuard Address”
Enter the IP address of the iGuard (example: 192.168.0.30)
“Remote Port”
This is iGuard UDP port.
