Troubleshooting
My unit doesn't light up (LED bar is dark):
–
Please check if the rack power supply is on (check the LEDs at the front plate of the
rack).
–
Make sure that the signal source (i.e. the microphone) is properly connected to the
module
–
Adjust the gain level (using the Input knob); insufficient gain level might cause that the
signal level is below the LED bar threshold
–
if you are using a condenser microphone, make sure that the phantom power is turned
on (use 48V switch at the front of the unit; the red LED will glow)
No signal plays thru the unit, regardless the settings at the front panel:
–
Please check the cables connecting the rack.
–
if you are using a condenser microphone, make sure that the phantom power is turned
on (use 48V switch at the front of the unit; the red LED will glow)
–
Please, make sure that you are NOT using front and rear XLR inputs simultaneously.
Only one of them can be occupied at the time.