Please read all of the following instructions and save them
for later reference before attempting to connect the unit to the mains.
EARTH
This unit is connected via its power cord to the mains safety earth.
NEVER OPERATE THE UNIT WITH THIS EARTH CONNECTION REMOVED.
COVERS
DO NOT remove the covers. Refer servicing to qualified personnel only.
VOLTAGE
Unit is set to operate only at the voltage indicated on the PSU unit
CHECK that the correct voltage is selected before connecting the AC mains supply.
FUSES
CHECK that the fuse fitted is the correct type for the local mains voltage.
ALWAYS replace fuse with the correct type.
MOISTURE
DO NOT expose the unit to rain or moisture. If the unit
should become so exposed REMOVE the mains power immediately.
CABLES
PROTECT the mains power cord from damage though impact or abrasion.
HEAT
ALWAYS site the unit away from sources of heat including direct sunlight and ensure
adequate ventilation around the unit.
Copyright 2014. All rights reserved.
The information in this document is subject to change without notice.
IGS Audio makes no warranty of any kind with respect to the material in this document
and shall not be liable for errors contained herein or for incidental or consequential
damages related to the use of the material.
Manual revision: 1.0 (December 2014)