Ignition Xo8 LED Fx Strobe, User Manual

Page: 29 / 36

10 Troubleshooting
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom Remedy
The unit does not work, no
light
Check the mains connection and the main fuse.
No response to the DMX con-
troller
1. Check the DMX connectors and cables for
proper connection.
2. Try using another DMX controller.
3. Check to see if the DMX cables run near or
alongside to high voltage cables that may cause
damage or interference to DMX interface circuits.
If the procedures recommended above do not succeed, please contact our Service
Center. You can find the contact information at www.thomann.de .
Troubleshooting
Xo8 LED Fx Strobe IP65 800W
29
stroboscope